• Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
  • Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
  • Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
  • Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
  • Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
  • Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm

Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm

Type: Graphite Electrodes
Composition: Petroleum Coke and Pitch Coke
Carbon Content: High-Carbon
Grade: UHP
Forming Way: Extruded Graphite
Crystal Morphology: Graphiting
Customization:

Contact Supplier

Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Specifications
RP, HP, UHP
Actual Dia
200-700mm
Actual Length
1600-2800 mm
Transport Package
Wood Package
Specification
SGS
Trademark
TTWY,
Origin
Qingdao China
HS Code
8545110000
Production Capacity
1500mt/Month

Product Description

Description of Product

Graphite Electrodes are a high temperature resistant graphite conductive refractory material used in the metallurgical industry. Graphite Electrodes are made of petroleum coke, bituminous coke as aggregates, coal tar pitch as binders, after raw material calcination, crushing and milling, batching, kneading, molding, roasting, impregnation, graphitization and machining, which are also known as artificial graphite electrodes in order to distinguish from natural graphite electrodes made of natural graphite.

Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
 
Notice : How to Use Graphite Electrode

> Be careful when transporting and pilling electrodes with forklift and avoid of collision. One layer of goods at a time; notice the balance and alignment and avoid falling or breakage.

> When loading and unloading with forklift, wire rope must be used and steel wrapping tape cannot be employed directly to fetch electrodes.

> Electrode should be stored in clean and dry place. When pilling up outdoors, it should be covered with rain-proof tarpaulin and the number of piling layers ought not to exceed four.

> When using electrodes, special tools should be employed to cut the steel wrapping tape, and crane should not be adopted to avoid bursting.

> Steel-wire ball, metallic brush or emery cloth is not allowed for cleaning the electrode thread, but compressed air free of oil and water is available.

> Use revolved resilient hanger and put soft truss pad under the electrode joint to avoid breakage of the thread.

> Lift the electrode to the furnace by using a hoister with resilient hangers, and find out the center and move slowly downwards, screw and tight with a hoop.

> If the two poles of the two electrodes are untouched or touched in overpressure, this may cause bad effect.

> In order to avoid electrode breakage, put the large materials in lower part and small materials in the upper part.

Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
Specifications for RP, HP, UHP graphite electrodes with nipples
 
RP HP UHP
Electrode:
Bulk Density≥ 1.56g/cm3 
Specific Resistivity≤ 8.5μm 
Bending Strength≥ 10.0MPa 
Elastic Modulus≤ 9.3GPa
Thermal Expansion Coefficient≤ 2.7x10 -6/°C
Ash≤ 0.5%
 
Nipple:
Bulk Density≥ 1.68g/cm3 
Specific Resistivity≤ 7.0μm 
Bending Strength≥ 14.0MPa
Elastic Modulus≤ 13.7GPa
Thermal Expansion Coefficient≤ 2.5 x10 -6/°C
Ash≤ 0.5%
Electrode:
Bulk Density≥ 1.65g/cm3 
Specific Resistivity≤ 6.5μm 
Bending Strength≥ 12.0MPa 
Elastic Modulus≤ 10.0GPa
Thermal Expansion Coefficient≤ 2.2x10 -6/°C
Ash≤ 0.3%
 
Nipple:
Bulk Density≥ 1.74g/cm3 
Specific Resistivity≤ 5.5μm 
Bending Strength≥ 16.0MPa
Elastic Modulus≤ 14.0GPa
Thermal Expansion Coefficient≤ 2.0 x10 -6/°C
Ash≤ 0.3%
Electrode:
Bulk Density≥ 1.68g/cm3 
Specific Resistivity≤ 5.8μm 
Bending Strength≥ 16.0MPa 
Elastic Modulus≤ 14.0GPa
Thermal Expansion Coefficient≤ 1.9x10 -6/°C
Ash≤ 0.2%
 
Nipple:
Bulk Density≥ 1.76g/cm3 
Specific Resistivity≤ 4.5μm 
Bending Strength≥ 18.0MPa
Elastic Modulus≤ 16.0GPa
Thermal Expansion Coefficient≤ 1.4 x10 -6/°C
Ash≤ 0.2%
 
Actual diameters Actual lengths
Mm Mm MAX MIN Rough spot Length Tolerance Shot Ruler size
200 8 204 201 198 1600 ±100 -275
250 10 256 252 248 1600
1800
300 12 307 303 299
350 14 357 353 347
400 16 409 404 400 1600
1800
2000
 
 
450 18 460 455 451
500 20 511 506 502
600 24 613 607 604
780 31.2 782 776 774 2000
2200
2400
±100 -400
800 32 802 796 794
870 34.8 872 866 862
900 36 902 896 892
920 36.8 922 916 912
960 38.4 962 956 952
1020 40.8 1022 1016 1012  
 
 
2200
2600
2800
1060 42.4 1062 1056 1052
1100 44 1102 1092 1092
1146 45.8 1148 1140 1138
1197 47.9 1199 1191 1189
1250 50 1252 1244 1242
1272 50.9 1274 1266 1264
1305 54.4 1307 1299 1297
1321 52.8 1323 1315 1313
1400 56 1402 1394 1392

Carbon Electrode Using Activated Carbon Powder HP Grade Dia 700mm
FAQ

Q1:Where can I get product and price information?

A1:Send us inquiry email, we will contact with you, once we receive your email, or contact me on WhatsApp, Linkedin, Skype and WeChat.
 

Q2: What's the payment terms?

A2: 30% of the payment should be paid in advance, and the balance should be paid on seeing the scan copy of BL; L/C is also welcomed.
 

Q3: How to deliver the goods?

A3: We deliver the goods by truck to the port, or loading in containers in our factory.
 

Q4: What's the minimum order quantity?

A4: 18-20tons, one 20 fcl.
 

Q5: What's the delivery time?

A5: 2-3 weeks after got the deposit.


 

Send your message to this supplier

*From:
*To:
avatar Miss Anni
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now