| Customization: | Available |
|---|---|
| Feature: | Corrosion Resistance, High-Thermal Conductivity, Thermal Shock Resistance |
| Manufacturing Technique: | Compression Moulding |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Clay Gray Crucible or Graphite Foundry Crucibles are made from a combination of graphite and clay, these crucibles are recommended for melting your precious, or non-precious metals and can handle large batches of material. Their thick inner walls can handle direct heat and open flame foundries. Rated to withstand temperatures up to 850ºC-1600ºC.
Physics
| Refractoriness | Apparent Porosity | Bulk Density | Crushing Strength |
| ≤1700ºC | ≤23% | ≥1.75g/cm3 | ≥8.5MPa |
| C% | Sic % | Al2O3 % | SiO2 % |
| 45 | 25 | 15 | 15 |
> Store crucibles in a dry , warm place or wooden palate
> Do not stock inside another
> Do not roll crucibles
> Use creramic fiber blanket to seal , interspace of cover and sides of furnace
> Use locating bricks in tilting furnaces,to interspace of expansion
> Tangential fire around crucible
> Add flux after metal is molten
> Avoid premature crucible failure by ensuring that the furnace drain hole is sealed
> For lift-out ,tongs must be placed on lower third crucible . fit tongs evenly on both side
> Check for cracks or other damage during transporting before use
> Base block must be flat , larger than crucible bottom and centered
> Use tongs and ingots should be placed carefully into the crucible
The crucible should be protected from moisture. The warehouse for storing crucibles should be dry and ventilated, and the temperature should be kept between 5ºC~25ºC, and the relative humidity should be 50-60%. The crucible must not be stored on brick soil or cement floor to avoid moisture.
Qingdao TTWY Manufacturing Co.,Ltd is a company specialized in producing casting equipment. It is located in Qingdao,a beautiful harbor city,which is convenient in transportation. Especially in graphite products, for expamle, the graphite electrode, graphite crucible, clay graphite crucible,
Isostatic clay graphite crucible, etc;
Q1: What information should I let you know if i want to get a quotation?
A: The required material dimension (Thickness*Width*Length,diameter*length; if possible, please kindly supply us drawings).
){kind=link}