| Customization: | Available |
|---|---|
| Feature: | Corrosion Resistance, High-Thermal Conductivity, Thermal Shock Resistance |
| Manufacturing Technique: | Compression Moulding |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The silicon carbide graphite crucible is made by adding silicon carbide particles of varying content to the raw material of the graphite crucible. For example, the content is 50%, 24%, and other different content. Of course, it can also be based on the different requirements of customers. Custom-made graphite crucibles with varying amounts of silicon carbide.
Silicon carbide crucible is mainly used in metallurgy, casting, machinery, chemical industry and other industrial sectors, is widely used in alloy tool steel smelting and non-ferrous metal and its alloy melting, and has better technical and economic effects.
> Fast heat conduction: because silicon carbide graphite crucible uses high thermal conductivity of graphite and other raw materials, shorten the melting time, save energy; In addition, the use of high thermal conductivity materials, dense tissue, low apparent porosity, fast thermal conductivity.
> Long life: compared with ordinary clay graphite crucible, the life can be extended by 3-5 times.
> Strong heat resistance impact: graphite crucible heat resistance impact function is strong, for hot and cold, not easy to break; Can withstand the thermal impact strength , so any process can be assured.
> Corrosion resistance: strong corrosion resistance to molten soup; The average fine matrix design delays the corrosion degree of the crucible.
> Anti-adhesion: Because graphite is not easy to adhere to the characteristics of molten soup, so the penetration and adhesion of molten soup is less
> Metal pollution is very little: strict control of material composition, to ensure that the graphite crucible is not polluted to metal when dissolving; The material design takes into account the relationship with the metal to be smelted and the characteristics of the process, and introduces little or no harmful impurities.
> Energy conservation and environment protection:Fast heat conduction can save a lot of fuel and reduce exhaust pollution.
> High strength: selection of high-quality materials, high pressure pressing, combined with fair, high temperature strength, scientific product modeling, high pressure capacity. Good anti-cracking function. So it maintains the original physical and chemical properties of natural graphite.
> Oxidation resistance: antioxidant design, and the use of high purity raw materials, protect graphite; High oxidation resistance is 5-10 times of ordinary graphite crucible.
> Less viscous slag: less slag hanging on the inner wall, greatly reduce the thermal resistance and the possibility of expansion and cracking of the crucible, always maintain large capacity.
Physical Properties
| Apparenrt Porosity | 9-12 % |
| Modulus of Rupture | 8-12 Mpa |
| Thermal Expansion Coefficient | 3.0-4.5 (10-6 K-1) |
| Special Electrical Resistance | 3.5-4.5*10-3 Ω.CM (24ºC) |
| 3.0-4.0*10-3 Ω.CM (800ºC) | |
| Thermal Conductivity | 140-150 W/(m*k) (25ºC) |
| 40-50 W/(m*k) (800ºC) |
| C (free C) | 37-42% |
| SiC (silicon carbide) | 35-40% |
| Model | D/mm | H/mm | d | Copper melting / kg | Aluminum Melting / kg |
| 10 | 130 | 170 | 128 | 8 | |
| 8 | 135 | 120 | 135 | ||
| 11 | 198 | 130 | 116 | 10 | |
| 35 | 225 | 200 | 160 | 20-30 | |
| 34 | 200 | 255 | 130 | 30-40 | |
| 110 | 330 | 390 | 185 | 100 | 50 |
| 150 | 395 | 420 | 215 | 200 | 60 |
| 200 | 400 | 505 | 215 | 260 | 80 |
| 310 | 454 | 500 | 270 | 300-350 | 100-150 |
| 210 | 450 | 500 | 210 | ||
| 300 | 451 | 495 | 260 | ||
| 320 | 460 | 590 | 270 | ||
| 410 | 475 | 630 | 270 | 400-450 | |
| 350 | 462 | 620 | 270 | ||
| 315 | 460 | 580 | 329 | ||
| 450 | 480 | 670 | 270 | ||
| 400 | 501 | 600 | 268 | 450 | |
| 293 | 510 | 520 | 260 | 150-200 | |
| 420 | 515 | 673 | 330 | 500-600 | |
| 480 | 508 | 670 | 268 | ||
| 365 | 530 | 530 | 280 | ||
| 490 | 530 | 600 | 325 | ||
| 451 | 515 | 610 | 280 | ||
| 500 | 520 | 700 | 268 | ||
| 370 | 530 | 570 | 280 | ||
| 700 | 605 | 505 | 290 | 600 | |
| 353 | 600 | 450 | 280 | ||
| 501 | 520 | 740 | 268 | ||
| 510 | 540 | 650 | 325 | 650 | 200 |
| 511 | 550 | 660 | 325 | ||
| 505 | 530 | 780 | 268 | ||
| 530 | 550 | 810 | 255 | ||
| 605 | 540 | 740 | 280 | ||
| 462 | 580 | 620 | 310 | 700 | |
| 610 | 550 | 790 | 375 | 700-750 | 200-250 |
| 780 | 596 | 620 | 260 | ||
| 460 | 585 | 600 | 320 | ||
| 463 | 580 | 620 | 320 | ||
| 601 | 550 | 810 | 375 | ||
| 620 | 550 | 810 | 280 | 800 | |
| 835 | 635 | 552 | 302 | ||
| 765H | 620 | 635 | 290 | 250-300 | |
| 820 | 715 | 530 | 300 | 850 | |
| 801 | 600 | 680 | 260 | ||
| 765 | 615 | 635 | 290 | ||
| 802-b | 610 | 700 | 330 | 900 | |
| 802 | 610 | 700 | 330 | ||
| 841 | 650 | 650 | 300 | 950-1000 | 300 |
| 840 | 650 | 650 | 302 | ||
| 911 | 710 | 600 | 290 | ||
| 803-b | 617 | 800 | 330 | ||
| 803 | 620 | 800 | 330 | ||
| 810 | 622 | 865 | 330 | ||
| 810X | 620 | 860 | 330 | ||
| 910 | 710 | 600 | 290 | 1000 | |
| 1020 | 711 | 660 | 300 | 350 | |
| 1100 | 658 | 820 | 280 | ||
| 1100-B | 658 | 820 | 280 | ||
| 1000 | 710 | 690 | 285 | ||
| 810-b | 622 | 865 | 330 | ||
| 1030 | 715 | 680 | 300 | 1200-1400 | |
| 1480 | 775 | 635 | 360 | 400 | |
| 1200 | 730 | 740 | 300 | ||
| 1050 | 725 | 718 | 300 | ||
| 1220 | 720 | 760 | 300 | ||
| 850 | 800 | 550 | 420 | ||
| 1551(H) | 780 | 750 | 360 | 1500 | 500 |
| 1540 | 766 | 748 | 403 | ||
| 1280 | 724 | 800 | 330 | ||
| 1651 | 775 | 800 | 320 | ||
| 1300 | 725 | 820 | 330 | 1500 | 500 |
| 1500 | 748 | 905 | 295 | 1600-2000 | |
| 1500-B-40 | 725 | 905 | 310 | ||
| 1650 | 775 | 800 | 390 | ||
| 1550 | 780 | 750 | 410 | ||
| 1701 | 880 | 680 | 340 | 550 | |
| 1950 | 826 | 750 | 350 | ||
| 1800H | 795 | 895 | 320 | 600 | |
| 1700 | 875 | 685 | 350 | ||
| 1800X | 785 | 900 | 390 | ||
| 1800 | 780 | 900 | 390 | ||
| 1800XB | 795 | 895 | 390 | ||
| 1901 | 880 | 755 | 340 | ||
| 1900 | 871 | 750 | 340 | 2000-2500 | |
| 5000(650) | 1024 | 650 | 500 | 700 | |
| 2251 | 885 | 875 | 340 | ||
| 2250 | 880 | 880 | 340 | 800 | |
| 2300 | 870 | 1000 | 355 | ||
| 5000(830) | 1038 | 830 | 500 | 3000-3500 | |
| 2500 | 901 | 1133 | 350 | 1000 | |
| 5000(850) | 1038 | 850 | 500 | ||
| 3300 | 970 | 880 | 735 | ||
| 2700 | 911 | 1165 | 350 | ||
| 5000(890) | 1039 | 890 | 500 | ||
| 5000(900) | 1040 | 900 | 500 | ||
| 5000(1050) | 1035 | 1050 | 500 | 4000-4500 | |
| 5000(1000) | 1040 | 1000 | 500 | ||
| 5000(1200) | 1042 | 1200 | 500 | 1500-2000 | |
| 5000(1320) | 1050 | 1320 | 500 | 5000-5500 |
> Prefabrication: The crucible prefabrication is braided with all carbon fiber, and the volume density of the crucible prefabrication is 0.4-0.6g/cm3.
> Curing: curing the crucible preform with furfuryl ketone resin.
> Density: Bitumen is repeatedly impregnated with carbonized dense crucible precast until the volume density of the crucible precast reaches 1.3g/cm3-1.4g/cm3.
> Purification: Put the prefabricated crucible into the high temperature furnace after purification, the shape is trimmed to make the carbon crucible blank.
> Silicon immersion: Put the carbon crucible blank into the silicon immersion agent for 12-24h naturally.
> Carbonization: the soaked carbon crucible blank into the carbonization furnace carbonization, carbonization temperature of 900-1000ºC.
> Repeat steps 5 and 6 until the carbon crucible blank density reaches 1.5-1.6g/cm3.
> Forming: grinding and polishing the internal and external surface of the crucible, that is, silicon carbide composite crucible products.
> The crucible should be stocked in the dry situation.
> Carry the crucible lightly.
> Warm the crucible in the drying machine or near the furnace. The warming temperature should be up to 500ºC.
> The crucible should be put under the furnace month flat.
> When put the metal into the crucible, you should take the crucible capacity as your reference. If the crucible is too full, it will be damaged by expansion.
> The clamps shape need as that of crucible. Avoid the concentrate stressed destroy of the crucible.
> Clean the crucible regularly and lightly.
> The crucible should be put in the center of the furnace and leave some distance between the crucible and furnace.
> Turn the crucible once in one week and this way can keep the service life.
> The flame should not touch the crucible directly.
> 24 hours constant use will make crucibles have longer service life.
The smelt soup in the crucible should be cleared out when the furnace stop working, in order to avoid molten soup solidification and will be expanded when fire to reheat, and affect the service life of crucible or even burst.
The graphite crucible should be protected from moisture. The warehouse for storing graphite crucibles should be dry and ventilated, and the temperature should be kept between 5ºC~25ºC, and the relative humidity should be 50-60%. The crucible must not be stored on brick soil or cement floor to avoid moisture.
In order to protect the glaze layer of the crucible, handling crucible must be very careful, to avoid knocking, collision or falling, we can't put the crucible on the ground and rolling to transport. Once the glaze layer of crucible is damaged, it will lead to oxidation and aging of crucible easily in the process of use. The crucible should be handled carefully in a padded cart (or other suitable conveyer).
Qingdao TTWY Manufacturing Co.,Ltd is a company specialized in producing casting equipment, especially in graphite products, for expamle, the graphite electrode and graphite crucible. It is located in Qingdao,a beautiful harbor city,which is convenient in transportation.
Q: What information should I let you know if I want to get a quotation?
A: The required material dimension (Thickness*Width*Length,diameter*length; if possible, please kindly provide us drawings).
The required more information, such as Surface Condition, Tolerance Request, the Quantity, and other mechanical and technical details.
If it is possible, please also provide the application of products, then we will recommend the most suitable products with details for confirmation.
Q: How do you gurantee the quality of the products?
A: Each step of production and finished products will be carried out inspection by QC department before storing in the warehouse. NG goods are not allowed in the completed goods warehouse.
Q: Can you guarantee the prompt delivery?
A: Yes, when we get your inquiries, we will not only evaluate the more competitive price, but also we can get the most reasonable delivery time. So the prompt delivery can be guaranteed.
Q: What is your lead time?
A : It usually need about 15- 20 days after receiving the PO.
Q : What is your payments terms?
A : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.(according to your order value)
Q : Can we visit your company?
A : Yes, for sure. It's my pleasure.
Q: What is the shipping cost?
A: The shipping cost is determined by the destination port, weight, packing size, total CBM of the products, we will try the best to get the most reasonable shipping cost from the forwarders or express couriers to help you save more money.
Q:What is the transportation way?
A:If the Gross Weight ≤45kg, it's better by express such as TNT, DHL, FedEx,, etc.
If the Gross Weight between 45kg to 100kg, by express or by air to your nearest airport can be both considered.
If the Gross Weight ≥ 100kg ,you can choose by Air or Sea to the nearest port.
Q:What service you can offer to your clients?
A:We provide presales service in various forms, for example, making investment budget,manufacturing planning,etc.so that customer make a reasonable plan with less cost. Moreover,we will also provide after sale service ,for example,free training about machine applications ect.
){kind=link}